Removal Method Of Self-adhesive Label
Feb 17, 2022| 1. Wipe with an eraser
Principle: rely on rubber to fuse self-adhesive.
Method: use an eraser to wipe constantly. At the beginning, the place with glue will turn black, but after wiping for a long time, the glue will slowly fall down.
Advantages: convenient operation and quick effect disadvantages: average effect.
Disadvantages: relatively laborious
2. Blow with a hair dryer
Principle: remove self-adhesive by heat.
Methods: use the hot air stall of the hair dryer to blow directly with hot air at a position about 10cm away from the self-adhesive; After blowing for a while, slowly remove the self-adhesive label while blowing.
Advantages: convenient operation, good effect and quick effect.
Disadvantages: it is not suitable for heat-resistant soft plastics. High temperature is easy to deform objects.
3. Metal needle removal method
Principle: pick up the self-adhesive label with a small metal needle or toothpick
Method: use a metal needle or toothpick to pick it up from one end, then move it slowly and pull the label up.
Advantages: convenient operation and general effect.
Disadvantages: be more careful
4. With edible vinegar
Principle: similarity compatibility principle.
Methods: dip white vinegar or vinegar with a dry dishwashing cloth and completely cover the labeled part to make it completely soaked. After soaking for 15-20 minutes, gradually wipe it along the edge of the self-adhesive label with a dishwashing cloth, and finally soak it in water for a while.
Advantages: suitable for self-adhesive on tableware such as dishes and chopsticks, non-toxic and harmless.
Disadvantages: the decontamination effect is slightly poor.
5. Edible oil
Principle: similarity compatibility principle.
Method: apply the edible oil evenly on the place where the label is pasted. After 3 ~ 5 minutes, you can tear it up directly and slowly from one corner of the label by hand, so that there will be no mark of the label.
Advantages: good decontamination effect of hard objects such as glass and stainless steel.
Disadvantages: the effect of removing self-adhesive from other objects is not good.
6. With lemon juice
Principle: similarity compatibility principle.
Methods: squeeze the lemon juice on the hand with adhesive dirt and rub it repeatedly to remove the adhesive mark.
Advantages: it is suitable for removing the self-adhesive adhered to the hand and will not cause any damage to the skin.
Disadvantages: the effect of removing self-adhesive from other objects is not good.
7. With alcohol
Principle: similarity compatibility principle.
Methods: use a cloth soaked with alcohol to completely wet the part with self-adhesive label. Wait a moment, and slowly wipe it from the edge of the self-adhesive label to the middle with a cloth with alcohol until all the self-adhesive is removed.
Advantages: good decontamination effect of hard objects such as glass and stainless steel.
Disadvantages: alcohol is not easy to get, and there is certain damage to the skin of the hand.
8. With essential balm
Principle: similarity compatibility principle.
Methods: soak the place with self-adhesive completely with balm, and wipe it off with a dry rag after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of balm, and then wipe it hard until it is wiped clean.
Advantages: almost all items will not be damaged, especially the object surface with printing and paint.
Disadvantages: decontamination takes a little longer.